Avaya Configuring WAN Lines Services Manual do Utilizador descarregar pdf (Página 55)

100

101

Configuring Synchronous Services

308648-14.00 Rev 00

2-7

Using the BCC

To set the MTU size, navigate to the serial prompt (for example,

box

;

serial/2/1

)

and type:

mtu

integer

For example:

serial/2/1#

mtu 2000

Using Site Manager

See the MTU parameter on page A-71 for information.

Enabling or Disabling Remote Address Filtering

Set the Promiscuous parameter to specify whether the interface filters packets for

addresses other than its own local address, or whether address filtering is based on

both the local and remote addresses.

With this parameter set to enabled, the interface receives all frames. By default,

address filtering is disabled: the interface receives only frames destined for its

local address. Enable or disable local and remote (promiscuous) address filtering

on the interface.

Using the BCC

To enable or disable address filtering, navigate to the serial prompt (for example,

box

;

serial/2/1

) and type:

promiscuous

variable

For example:

serial/2/1#

promiscuous disabled

serial/2/1#

promiscuous enabled

Using Site Manager

See the Promiscuous parameter on page A-71 for information.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 461 462

Comentários a estes Manuais

Sem comentários

Avaya Configuring WAN Lines Services Manual do Utilizador Página 55

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring WAN Lines Services