Avaya Configuring WAN Lines Services Manual do Utilizador descarregar pdf (Página 247)

100

101

Configuring FE1 Services

308648-14.00 Rev 00

9-3

Configuring FE1 Services Using Site Manager

You configure an FE1 interface (port) using the lines for ISDN Primary Rate

Interface (PRI) permanent circuit (non-PRI) applications.

For FE1 ports, the default port application mode must be NONPRI. This indicates

that all of the lines have a permanent circuit number and are for leased lines.

Setting the Clock Parameters

Clock parameters define the timing sources that apply to ports and DS0 timeslots

that an FE1 link module supports. The primary clock i

dentifies the primary source

of the timing signals. The router uses the secondary clock only when the primary

clock is unavailable.

The options for the clock parameters are as follows:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on an unconfigured FE1 connector.

The Port Application window opens.

2. Set the Port Application Mode parameter

NONPRI

. For information on this

parameter, click on

Help

or see

page A-43

3. Click on

. A window containing the clock

parameters opens.

Table 9-1. Clock Parameter Options

BCC Option Site Manager Option Description

internal Internal Uses the internal clock chip.

loop1 Port 1 Ext Loop Uses the signal coming in from port 1.

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 461 462

Comentários a estes Manuais

Sem comentários

Avaya Configuring WAN Lines Services Manual do Utilizador Página 247

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring WAN Lines Services