Avaya Configuring WAN Lines Services Manual do Utilizador descarregar pdf (Página 227)

100

101

Configuring FT1 Services

308648-14.00 Rev 00

8-25

Setting the Clock Source

In the BCC, the Clock Source parameter indicates the default timing, or clock,

source for transmitting data to the network. Timing is set to internal by default,

which indicates that the logical line is on the network. When the logical line is on

either end of a private-wire configuration, set timing to network (master) on one

end of the configuration and internal (slave) on the other end.

Using the BCC

To change the clock source, navigate to the logical-line prompt (for example,

box

;

ft1/1/1

;

logical-line/1/1

) and type:

clock-source

variable

For example:

logical-line/1/1#

clock-source internal

Enabling or Disabling BofL Messages

Transmission of BofL packets is enabled by default on a logical line. A BofL

packet is sent as often as the value you specify for the BofL Timeout parameter.

You can disable or reenable BofL messages on the logical line.

Using the BCC

To enable or disable BofL messages, navigate to the logical-line prompt (for

example,

box

;

ft1/1/1

;

logical-line/1/1

) and type:

bofl

variable

For example:

logical-line/1/1#

bofl disabled

Using Site Manager

See the Breath of Life (BofL) Enable/Disable parameter on page A-50 for

information.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 461 462

Comentários a estes Manuais

Sem comentários

Avaya Configuring WAN Lines Services Manual do Utilizador Página 227

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring WAN Lines Services