Avaya Configuring WAN Lines Services Manual do Utilizador Página 340

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 462
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 339
Configuring WAN Line Services
A-46
308648-14.00 Rev 00
Parameter: Signal Level (dB)
Path: FT1 Connector > Edit Logical Lines > Port Details > FT1 Port Parameters
Default: 0.0 dB
Options: -15 dB
|
-7.5 dB
|
0.0 dB
|
0.5 dB
|
0.8 dB
|
1.1 dB
|
1.5 dB
Function: Specifies the T1 transmit power level, in decibels (dB).
The DS1 values of -15 and -7.5 dB are long-haul; the carrier determines these
values if 0.0 dB is not sufficient.
The DSX1 values of 0.0, 0.5, 0.8, 1.1, and 1.5 dB are short-haul; they
correspond to the cable length as follows:
0.0 dB -- 0 to 133 ft.
0.5 dB -- 133 to 255 ft.
0.8 dB -- 255 to 399 ft.
1.1 dB -- 399 to 533 ft.
1.5 dB -- 533 to 655 ft.
Instructions: Specify the decibel level based on the length of the cable or as the carrier
specifies.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.3.1.6
Parameter: Setup Alarm Threshold (seconds)
Path: FT1 Connector > Edit Logical Lines > Port Details > FT1 Port Parameters
Default: 2 seconds
Options: 2 to 10 seconds
Function: Specifies the time, in seconds, that FT1 tolerates a performance defect or
anomaly. If the performance defect or anomaly is still present when this time
interval expires, FT1 records a performance failure and logs an event message.
Instructions: Set the timer value.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.3.1.7
Vista de página 339
1 2 ... 335 336 337 338 339 340 341 342 343 344 345 ... 461 462

Comentários a estes Manuais

Sem comentários