Avaya Configuring IP Services Manual do Utilizador Página 61

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 415
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 60
Starting IP Services
114065 Rev. A 2-15
Using the Circuitless IP Interface
A circuitless IP interface has an IP address that is not mapped to a specific circuit.
If one or more of the router’s IP interfaces become disabled, this circuitless
feature ensures that the router is always reachable using the circuitless IP interface
address, as long as a viable path to the router exists. The IP router can support one
circuitless IP interface.
IP traffic is delivered to and transmitted from the circuitless interface in the same
way as any other IP interface. In addition, the circuitless IP interface can receive
packets from any application.
When you configure a circuitless IP interface, note the following:
You can configure one circuitless IP interface per router. Additional
circuitless IP interfaces will not initialize.
You can add IP routing protocols to the circuitless interface. (The current
version of Site Manager allows you to add BGP and OSPF to a circuitless
interface.)
You must assign a unique IP address and subnetwork number to the circuitless
IP interface.
•Youcannot configure a circuitless IP interface in nonforwarding mode.
Starting IP on the Circuitless Interface
To configure a circuitless IP interface, begin at the Configuration Manager
window and proceed as follows:
1. Select Protocols > IP > Circuitless IP > Create to display the IP
Configuration window.
2. Edit the parameters on the IP Configuration window.
3. Click on OK to save the circuitless IP interface.
A special Select Protocols window opens, listing the protocols you can
configure on a circuitless interface.
4. Select a protocol and click on OK.
Vista de página 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 414 415

Comentários a estes Manuais

Sem comentários