
Site Manager Parameters
114065 Rev. A A-53
TFTP Parameters
Parameter: Adjacent Host X.121 Address
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: None
Options: Any valid X.121 address
Function: Specifies the X.121 address of the adjacent host. Set this parameter only if this
is a PDN/X.25, DDN/X.25, or BFE/X.25 connection.
Instructions: Enter the appropriate X.121 address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.9
Parameter: Enable
Path: Configuration Manager > Protocols > IP > TFTP
Default: Enable
Options: Enable
| Disable
Function: Specifies whether TFTP is enabled for the IP router.
Instructions: Select Enable to enable TFTP for the IP router. Because TFTP allows
write-access to the router’s file system, we recommend that you do not enable
TFTP in network environments in which you are concerned with security. Select
Disable to disable TFTP for the IP router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.6.1
Parameter: Default Volume
Path: Configuration Manager > Protocols > IP > TFTP
Default: 2
Options: 1
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14
Function: Specifies which of the router’s slots will be used, by default, for all TFTP
GETs and PUTs.
Instructions: Specify the appropriate slot number. If you are configuring an AN™ router,
you must specify slot 1.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.6.2
Comentários a estes Manuais