Avaya Configuring IP Services Manual do Utilizador Página 386

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 415
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 385
Configuring IP Services
C-18 114065 Rev. A
Parameter: Export from Protocol
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Export
Filters
Default: Any
Options: Any
| RIP | EGP | OSPF | Direct | Static | BGP-3
Function: Identifies the source of the routing information: direct connection, static route,
or a RIP-, EGP-, OSPF-, or BGP-3 derived route.
Instructions: Select the appropriate option.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.15.1.5
Parameter: Export Peer AS
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Export
Filters
Default: 0
Options: 1 to 65535
Function: Identifies the autonomous system to which the BGP router at the remote end of
this BGP peer connection belongs. This filter will apply to updates sent to any
router in this AS. The value 0 means “any” AS.
Instructions: Enter the appropriate AS number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.15.1.7
Parameter: Export Peer Address
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Export
Filters
Default: 0.0.0.0
Options: Any IP address
Function: Specifies the IP address of the interface on the remote side of this BGP peer
connection. This filter will apply to updates sent to this router. The value 0.0.0.0
means “any” peer.
Instructions: Enter the IP address in dotted decimal notation. If the peer is in a remote AS, the
address must be on the same subnet as the local interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.15.1.8
Vista de página 385
1 2 ... 381 382 383 384 385 386 387 388 389 390 391 ... 414 415

Comentários a estes Manuais

Sem comentários