Avaya Configuring IP Services Manual do Utilizador Página 220

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 415
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 219
Configuring IP Services
A-4 114065 Rev. A
Parameter: BGP Collision Detect
Path: Configuration Manager > Protocols > IP > BGP > Global
Default: Enable
Options: Enable
| Disable
Function: Specifies whether redundant BGP connections to the same router will be
detected and disallowed. If you want only one BGP connection to the same
router to be maintained, use the default. If you want to allow redundant
connections, enter Disable.
Instructions: Collision detection is based on router ID. If two BGP peers have multiple
physical connections and want to establish a BGP session across each physical
connection, you must disable this parameter. The advantage of a configuration
with multiple physical connections is redundancy. The disadvantage is that such
a configuration results in multiple copies of each route.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.16
Parameter: Multi-hop EBGP Connection
Path: Configuration Manager > Protocols > IP > BGP > Global
Default: Disable
Options: Enable
| Disable
Function: Specifies whether BGP allows multihop connections to an external BGP peer.
Instructions: By default, BGP enforces the rule that requires an external BGP peer to be
located on a directly attached network. Use this parameter to override the
restriction. Enabling multihop BGP connections is dangerous because it can
cause BGP speakers to establish a BGP connection that traverses a third-party
AS, which may violate policy considerations and may also introduce
forwarding loops.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.6
Vista de página 219
1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 414 415

Comentários a estes Manuais

Sem comentários