Avaya Configuring IP Services Manual do Utilizador Página 236

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 415
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 235
Configuring IP Services
A-20 114065 Rev. A
Parameter: Enable
Path: Configuration Manager > Protocols > IP > EGP > Neighbors
Default: Enable
Options: Enable
| Disable
Function: Enables or disables an EGP neighbor relationship with the specified IP address.
Instructions: Set this parameter to Disable if you want to temporarily disable this neighbor
relationship rather than delete it. Or set it to Enable if you previously disabled
this neighbor relationship, and now want to re-enable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2
Parameter: Acquisition Mode
Path: Configuration Manager > Protocols > IP > EGP > Neighbors
Default: Passive
Options: Passive
| Active
Function: Specifies which of the two neighbors initiates EGP connections. The router in
the active mode is the initiator.
Instructions: Set this parameter to Active if you want the local EGP neighbor to be the
initiator of EGP connections. Otherwise, accept the default value, Passive.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.7
Parameter: Poll Mode
Path: Configuration Manager > Protocols > IP > EGP > Neighbors
Default: Both
Options: Active
| Passive | Both
Function: Specifies the type of neighbor reachability algorithm this local EGP neighbor
executes. In the active mode, a router sends Hello and Poll messages to request
reachability status from its neighbor. In the passive mode, a router responds to
Hello and Poll messages with I-H-U and update messages.
Instructions: Accept the default value, Both, or set to either Active or Passive (depending on
the neighbor reachability algorithm you want this router to execute).
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.8
Vista de página 235
1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 414 415

Comentários a estes Manuais

Sem comentários