
Routing Policies
114065 Rev. A B-15
BGP-4-Specific Accept Policy Parameters
Parameter: Injection List
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP4 > Accept
Policies
Default: An empty list
Options: A list of network identifiers
Function: Specifies network IDs to be included in the routing table in place of the
network IDs listed in the received advertisement.
Instructions: Specify a non-null value only if the Action parameter is set to Accept. The
values you enter in the injection list determine the action taken.
If you supply a list of network IDs, these IDs are injected into the routing
table instead of the actual received IDs.
If you use the default (an empty list), the actual received network IDs are
injected into the routing table.If you supply a list that includes the encoding
255.255.255.255/255.255.255.255, the actual received network IDs are
injected into the routing table along with the other IDs in the injection list.
This allows insertion of an aggregate or default along with the actual network.
In the current release, the only valid network ID that you can include in an
injection list is the default ID, 0.0.0.0/0.0.0.0. This parameter replaces the
received routes with the default route and places the default route in the
routing table.This parameter associates the default route with the attributes of
the best route that matches the policy.
If you are constructing a BGP-3 or BGP-4 accept policy, keep in mind that the
Injection List parameter does not perform route aggregation as defined in
RFC 1654. To aggregate routes in a transit AS, you must construct an
announce policy and use the announce Advertise parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.9
Comentários a estes Manuais