Avaya Configuring IP Services Manual do Utilizador Página 297

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 415
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 296
Site Manager Parameters
114065 Rev. A A-81
Parameter: Hello Interval
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: 10 seconds
Options: 1 to 65,535 seconds
Function: Indicates the number of seconds between the hello packets that the router
sends on the interface. Although the default value is 10 seconds, we suggest
the following values for this parameter: for broadcast, 10 seconds; for
point-to-point, 15 seconds; for NBMA, 20 seconds; for point-to-multipoint,
15 seconds.
Instructions: Either accept the default value of 10 seconds or set the hello interval to some
higher number for slower-speed serial lines. This value must be the same for
all routers attached to the same network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.11
Parameter: Dead Interval
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: 40 seconds
Options: 1 to 2147483647 seconds
Function: Indicates the number of seconds that a router’s hello packets have not been
seen before its neighbors declare the router down. The dead interval value
should be some multiple of the hello interval value. We suggest the following
values for this parameter: for broadcast, 40 seconds; for point-to-point, 60
seconds; for NBMA, 80 seconds; for point-to-multipoint, 60 seconds.
Instructions: Either accept the default value of 40 seconds or set the dead interval to some
higher number for slower-speed serial lines. This value must be the same for
all routers attached to the same network
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.12
Vista de página 296
1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 414 415

Comentários a estes Manuais

Sem comentários