
Configuring IP Services
A-90 114065 Rev. A
OSPF Virtual Interface Parameters
Parameter: Metric
Path: Configuration Manager > Protocols > IP > OSPF > Areas > Ranges
Default: 0
Options: 0 to 2147483647
Function: Specifies the metric to advertise into other areas as the distance from the
OSPF router to any network in the range.
Instructions: If you select 0, the router uses the value calculated by OSPF.
MIB Object ID: 1.3.6.14.1.18.3.5.3.2.3.4.1.8
Parameter: Transit Area ID
Path: Configuration Manager > Protocols > IP > OSPF > Virtual Interfaces
Default: None
Options: Any area ID
Function: Identifies the transit area through which this virtual link is configured.
Instructions: Enter the appropriate area ID in dotted decimal notation. The transit area
must contain the neighboring router identified in the Neighbors Router ID
parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.6.1.4
Parameter: Neighbor’s Router ID
Path: Configuration Manager > Protocols > IP > OSPF > Virtual Interfaces
Default: None
Options: Any IP address
Function: Identifies the interface at the other end of this virtual link.
Instructions: Enter the appropriate IP address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.5
Comentários a estes Manuais