
Configuring IP Services
A-30 114065 Rev. A
Parameter: TR Endstation
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Off
Options: On
| Off
Function: Specifies source routing over Token Ring selection.
Instructions: Use the On option to enable the parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.64
Parameter: Redirects
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Enable
Options: Enable
| Disable
Function: Indicates whether or not this interface sends out ICMP redirects. ICMP redirects
are messages sent by the router to alert a host that it should be using a different
path to route data.
Instructions: Reset to Disable if you do not want this interface to send out redirects. For
example, in a Frame Relay network, two stations on the same network may not
be directly connected if the network is not fully meshed. Thus, in this case, you
would set Redirects to Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.70
Comentários a estes Manuais