
Site Manager Parameters
114065 Rev. A A-99
Parameter: Triggered Updates
Path: Configuration Manager > Protocols > IP > RIP > Interfaces
Default: Disable
Options: Enable
| Disable
Function: Configures RIP to generate an update each time it recalculates a route’s
metric.
Instructions: For compatibility with routers running Version 8.10 or earlier, disable this
feature. Pre-V9.00 implementations of RIP do not support triggered updates.
If you enable triggered updates, RIP will generate triggered updates with a
maximum frequency of one every 5 seconds. The route will include all
changes that occurred in the last 5 seconds. This enforced interval prevents
RIP from monopolizing CPU resources during periods of instability.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.16
Parameter: Authentication Type
Path: Configuration Manager > Protocols > IP > RIP > Interfaces
Default: None
Options: None
| Simple
Function: Specifies the way RIP handles simple authentication in RIP2 mode.
Instructions: If you are running RIP in RIP2 mode and do not want authentication, set this
parameter to None. If you set the parameter to Simple, RIP drops all received
Version 1 updates and processes only Version 2 updates with the correct
password set.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.17
Parameter: Authentication Password
Path: Configuration Manager > Protocols > IP > RIP > Interfaces
Default: None
Options: A valid password string up to 16 characters
Function: Specifies a password.
Instructions: Set the Authentication Type to Simple and enter a password.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.18
Comentários a estes Manuais