Avaya Configuring Line Services Manual do Utilizador descarregar pdf (Página 212)

Configuring Line Services

6-42

Repeat Steps 2 and 3 for each test you want to run.

5. Click on Done.

The MCT1 Port Parameters window appears (r

efer to Figure 6-19). All

changes you apply to the port in the MCT1 Port Actions window are effective

only while the window is active. When you exit the MCT1 Port Actions

window, all port settings revert to the original port settings.

Caution: Wait until the MCT1 Port Actions window updates before selecting

another action.

Table 6-1. Send Commands for BERT Mode

Send Command Function

Reset BERT Counters Resets all counters to 0

Insert 1 Error Inserts a single (non-repeating) error into the bit stream

Insert 1 Error/1K Inserts a deliberate error into every thousandth position in the bit

stream

Insert 1 Error/1M Inserts a deliberate error into every millionth position in the bit

stream

Disable Insert Error Stops the insertion of deliberate errors into the bit stream

Loop Up Sends a loop-up code to the remote end

Loop Down Sends a loop-down code to the remote end

FDL Payload Loop Transmits a payload loopback activate code to the remote end

FDL Disable Payload Transmits a payload loopback deactivate code to the remote end

FDL Line Loop CI Transmits a line loopback activate code (format CI) to the remote

end

FDL Line Loop IA Transmits a line loopback activate code (format IA) to the remote

end

FDL Line Loop IB Transmits a line loopback activate code (format IB) to the remote

end

FDL Disable Line Loop Transmits a line loopback deactivate code to the remote end

FDL Disable All Transmits a loopback deactivate code to deactivate all types of

FDL-initiated loopbacks

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 267 268

Sem comentários

Avaya Configuring Line Services Manual do Utilizador Página 212