Avaya Configuring Line Services Manual do Utilizador descarregar pdf (Página 110)

Configuring Line Services

4-10

Parameter: Local Address

Default: 7

Range: 1 to 255

Function: Speciﬁes the 1-byte HDLC address of this synchronous interface, as

follows

Instructions: Select an appropriate local HDLC address. Site Manager assumes that the

values you enter are decimal. To enter a hexadecimal value, preface the

value with 0x; for example, 0x10.

Use unique HDLC addresses for the local and remote interfaces at either

end of the point-to-point circuit. If you conﬁgure a device at one end of a

point-to-point connection with a local address of DCE and a remote

address of DTE, you must conﬁgure the device at the other end with a

local address of DTE and a remote address of DCE.

If you conﬁgure X.25 on this line, set this parameter to either 1 (DCE) or

3 (DTE).

When you send packets to this interface, use this HDLC address.

MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.30

1 Address of the DCE

3 Address of the DTE

Any other value An explicit address value

Note: Refer to “Point-to-Point Addresses,” later in this chapter, for a more

detailed explanation of the Local Address and Remote Address parameters.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 267 268

Sem comentários

Avaya Configuring Line Services Manual do Utilizador Página 110