Avaya Configuring Line Services Manual do Utilizador descarregar pdf (Página 164)

Configuring Line Services

5-30

Assigning Timeslots

To assign the timeslots (also called channels or DS0s) for each ISDN PRIcircuit:

1. Start at the MCE1 Timeslots window (refer to Figure 5-19).

The MCE1 Timeslots window graphically represents the 31 timeslots.

2. Click on a timeslot.

Site Manager displays a list of circuits to which you can assign the timeslot.

3. Select the circuit to which you want to assign the timeslot.

4. Repeat Steps 2 and 3 for each timeslot you want to assign.

5. Click on OK.

The MCE1 PRI Logical Lines window appears (r

efer to Figure 5-18).

Editing the B-Channel Logical Line Parameter

To modify the B-Channel line:

1. Start at the MCE1 PRI Logical Lines window (refer to Figure 5-18).

2. Select the line and circuit name from the logical line list.

Site Manager displays the circuit’s MTU.

3. Edit the MTU Size (byte) paramater.

Use the parameter description that follows as a guidelines.

4. Click on Apply.

Note: Timeslot 16 is unavailable when the Line Type parameter in the MCE1

Port Parameters window (r

efer to Figure 5-4) is set to E1 MF or E1 CRC MF.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 267 268

Sem comentários

Avaya Configuring Line Services Manual do Utilizador Página 164