Avaya Configuring Line Services Manual do Utilizador descarregar pdf (Página 104)

Configuring Line Services

4-4

Parameter: BOFL

Default: Enable

Options: Enable

| Disable

Function: Enables the transmission of proprietary Breath of Life messages over a

point-to-point connection between the local router and a remote peer.

The exchange of BOFL messages provides a level of conﬁdence in the

point-to-point connection. With BOFL enabled, the router sends periodic

keep-alive messages to the remote peer.

Instructions: Set to Enable or Disable, depending on whether you want to transmit

BOFL messages over this synchronous interface. If you enable BOFL

locally, the remote peer must also be conﬁgured to enable BOFL.

We recommend that you enable BOFL for point-to-point connections

between Bay Networks peers. However, if such a connection is

accomplished through a wide-area transport service such as Frame Relay,

X.25, or SMDS, you must disable BOFL.

MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.7

Parameter: BOFL Timeout

Default: 5 seconds

Range: 1 to 60 seconds

Function: Speciﬁes the time between transmissions of Breath of Life messages from

this synchronous interface. Timeout will occur if ﬁve periods elapse

without both a successful frame transmission and a successful reception.

When timeout occurs, the router disables and re-enables the synchronous

line. For example, if you set this parameter to 5 seconds, the interface

must successfully transmit and receive a frame within 25 seconds.

Timeout occurs in 25 seconds.

This parameter is valid only if you set BOFL to Enable.

Instructions: Either accept the default, 5 seconds, or specify a new value.

MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.8

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 267 268

Sem comentários

Avaya Configuring Line Services Manual do Utilizador Página 104