Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 94)

Configuring DLSw Services

4-2

304233-A Rev. 00

To tune DLSw single- and dual-switch services, use the DLSw advanced global

and advanced interface parameters.

Adding Single-Switch DLSw Services

When configuring a DLSw single-switch network, DLSw is enabled on each

relevant interface. Using single-switch mode allows communication between:

• Devices attached to different local interfaces on the same router. For example,

an SDLC-attached 3274 control unit can communicate with a local

LAN-attached SNA server (Figure 4-1

• A local device and an SNA device directly attached to a Frame Relay network.

An SNA device connected to Router B (Figure 4-1

) can communicate with the

AS/400 using either BNN or BAN protocols.

• SNA and NetBIOS devices attached to different routers, each running DLSw.

For example, a NetBIOS client attached to Router A can communicate with

the NetBIOS server connected to Router B (Figure 4-1

). The connection can

cross multiple routers running DLSw. Since DLSw is running on the WAN

interface, the router operates as single-switch DLSw.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 94