Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 177)

DLSw Service Parameters

304233-A Rev. 00

A-37

Parameter: Canureach Timer2

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: 30

Range: 0 to 3600

Function: Specifies the time interval (in seconds) after which the router sends a

CANUREACH message to the remote DLSw peer to establish a session. This

parameter setting becomes active when the Canureach Timer and Canureach

Retries settings expire.

Set the Canureach Timer2 and the Canureach Retries2 parameters in

configurations where you want to switch to a longer interval, if the initial

connection does not occur within the Canureach Timer and Canureach Retries

settings. The slow poll timer would then use the Canureach Timer2 and

Canureach Retries2 settings.

Instructions: Enter the number of seconds that you want for the time interval. For example,

enter 1 to transmit a CANUREACH message once per second, or enter 3600 to

transmit the command once per hour. Enter 0 if you do not want to transmit a

CANUREACH message.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.17

Parameter: Canureach Retries2

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: 0

Range: 0 to 4294967295

Function: Specifies the number of times a CANUREACH message is sent to the remote

DLSw peer to establish a session. This parameter setting becomes active when

the standard Canureach Retries parameter setting expires.

Set the Canureach Timer2 and the Canureach Retries2 parameters in

configurations where you want to switch to a longer interval, if the initial

connection does not occur within the standard Canureach Timer and Canureach

Retries settings.

Instructions: Type the number of retries that you want. Enter 0 if you do not want to transmit

CANUREACH messages. Type 4294967295 to send an infinite number of

CANUREACH messages for this connection.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.18

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 177