Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 169)

DLSw Service Parameters

304233-A Rev. 00

A-29

Parameter: DLSw Mode

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: Primary

Options: Primary

| Secondary PP | Secondary MP | Negotiable

Function: Specifies the type of link station you are configuring on this node. A primary

link station controls a data link, issues commands, polls secondary stations, and

initiates error recovery procedures. Only one link station on an SDLC line can

be the primary station; all other stations on the line must be secondary. When

configured as a primary SDLC link station, the router communicates with

downstream PU 2.0, PU 2.1, and PU 4 nodes. PU 4 nodes support multipoint

configurations only.

A secondary link station receives commands and responds to primary link

station polls. When configured as a secondary SDLC link station, the router

emulates a PU 2.0 or PU 4 node. PU 4 nodes support multipoint configurations

only.

When configured as a negotiable SDLC link station, the router supports

connections to PU 4 devices.

Instructions: Click on Values and select Primary, Secondary PP (point-to-point), Secondary

MP (multipoint), or Negotiable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.2.1.8

Parameter: Link Station Address (hex)

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: None

Options: Any valid hexadecimal link station address from 0x01 to 0xFE

Function: Specifies the address of the link station. This parameter must match the polling

address defined in the SDLC-attached device.

Instructions: Type 0x followed by the link station address.

MIB Object ID: N/A

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 169