Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 179)

DLSw Service Parameters

304233-A Rev. 00

A-39

Parameter: SDLC Transmit Credit

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: 10

Range: 0 to 200

Function: Specifies the maximum number of frames that DLSw can send to SDLC.

Instructions: Enter the maximum number of frames you want DLSw to send to SDLC. For

example, enter 1 if you want DLSw to send only one frame to SDLC until it

receives a credit update from SDLC. Enter 0 if you want DLSw to send an

infinite number of frames to SDLC without updating the SDLC credit.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.16

Parameter: Enable XID PassThru

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: Disable

Options: Enable | Disable

Function: Specifies whether XID is to be passed through to SDLC when the host is

connected to Token Ring and the remote is SDLC. This parameter is used for

PU 2.1 circuits.

Instructions: Accept the default, Disable, or change to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.19

Parameter: Device Activation Seq

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: Local Device First

Options: Local Device First | Peer First

Function: Specifies the sequence of activation for SDLC PU2.0 fixed format primary

devices. LocalDeviceFirst specifies that DLS establishes a connection with the

SDLC End Station first. Once the local device responds successfully, DLS then

starts up the SSP connection to the peer. PeerFirst specifies that DLS starts the

SSP connection first, and contacts the SDLC End Station only after receiving a

CONTACT message from the peer.

Instructions: Accept the default, Local Device First, or change to Peer First.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.12

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 179