Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 205)

DLSw Service Parameters

304233-A Rev. 00

A-65

Parameter: Backup Max Up Time

Path: Configuration Manager > DLSw > Multicast IP Table > Multicast IP Table

Default: 0

Range: 0 to 999999

Function: Specifies the maximum time (in seconds) that the backup peer can remain

connected to the local DLSw peer. When the maximum time is reached, the

software terminates the TCP connection if there are no active TCP sessions

between the routers. The software overrides the Backup Max Up Time

parameter setting only if there is an active (non-idle) TCP connection with data

transferring between the routers.

Instructions: Type a value in the range 0 to 999999. Specify 0 to disable the Backup Max Up

Time parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.15.1.7

Parameter: Backup Hold Down Time (sec)

Path: Configuration Manager > DLSw > Multicast IP Table > Multicast IP Table

Default: 120

Range: 0 to 2147483647

Function: Specifies the time to wait (in seconds) after the primary peer is declared

unreachable before the local router initiates a TCP connection to the backup

peer. The hold down time ensures that the primary peer has enough time to

respond to a TCP connection request before the local router initiates a TCP

connection to the backup peer.

Instructions: Accept the default, 120, or click on the Values button and specify a different

value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.15.1.8

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 205