Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 206)

Configuring DLSw Services

A-66

304233-A Rev. 00

Global DLSw Protocol Priority Parameters

The Global DLSw PP Parameters/Defaults window (Figure A-20) contains

parameters that let you enable default queues for configured and unconfigured

peers, and customize the values that control how priority queues work.

Parameter: Backup Start Time (hhmm)

Path: Configuration Manager > DLSw > Multicast IP Table > Multicast IP Table

Default: 1

Range: 0 to 2400

Function: Specifies the start time when a configured backup peer is available. During this

time period, the local router can establish a TCP connection with this backup

peer if the primary peer is unreachable.

Instructions: Type the start time in hhmm format, where hh is hours and mm is minutes using

the 24-hour clock. For example, typing 0820 specifies 8:20 a.m., and 2400

specifies 12:00 midnight. Type 0 to disable the Backup Start Time parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.15.1.9

Parameter: Backup End Time (hhmm)

Path: Configuration Manager > DLSw > Multicast IP Table > Multicast IP Table

Default: 2400

Range: 1 to 2400

Function: Specifies the end time when a configured backup peer is available. During this

time period, the local router can establish a TCP connection with this backup

peer if the primary peer is unreachable.

Instructions: Type the end time in hhmm format, where hh is hours and mm is minutes using

the 24-hour clock. For example, typing 0820 specifies 8:20 a.m., and 2400

specifies 12:00 midnight. The Backup End Time parameter is disabled if the

Backup Start Time is set to 0.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.15.1.10

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 206