Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 173)

DLSw Service Parameters

304233-A Rev. 00

A-33

Parameter: IDNUM

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: None

Options: Any 5-digit hexadecimal value from 00000 to FFFFF (for T1.0 or T2.0 nodes)

Function: Specifies the ID number, which must match the host’s IDNUM parameter value

that identifies incoming connection requests. This parameter is used with the PU

Type, IDBLOCK, and XID Format parameters to determine the station XID

value.

Instructions: Obtain the configured value at the host (from VTAM or other host operating

system) for this device. Type a 5-digit hexadecimal value from 00000 to FFFFF

for T1.0 or T2.0 nodes.

MIB Object ID: N/A

Note: IDBLOCK and IDNUM (required for PU 1.0 or 2.0 devices only) must

match the same values on the host. The 3-digit IDBLOCK and the 5-digit

IDNUM may be defined on the host as a single 8-digit XID.

Parameter: XID Format

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: None

Options: FIXED

| VARIABLE1 | VARIABLE2

Function: Specifies the format of the XID I-field. This parameter is typically set to FIXED

for PU 2.0 devices, VARIABLE1 for PU 1.0 devices, and set to VARIABLE2

for PU 2.1 devices.

Instructions: Enter one of the following options:

• FIXED -- Fixed format; most often used for PU 2.0 devices

• VARIABLE1 -- Variable format (for T1.0/T2.0/T2.1 to T4/T5 node

exchanges), mostly used for PU 1.0 devices

• VARIABLE2 -- Variable format; most often used for PU 2.1 devices (for T2.1

to T2.1/T4/T5 node exchanges)

MIB Object ID: N/A

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 173