Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 213)

DLSw Service Parameters

304233-A Rev. 00

A-73

DLS Priority Filters Parameters

The DLS Priority/Outbound Filters window (Figure A-23) shows the existing

outbound traffic filters for DLSw peers, regardless of whether the filters are

currently active on the peers. Each entry in the filter scroll box lists the filter

number, filter name, and IP address of the affected DLSw peer. Filters that apply

to all DLSw peers appear with IP address 0.0.0.0. Site Manager numbers the

filters for each peer interface chronologically. The parameters in the DLS Priority

Filters window let you configure DLSw priority filters.

Parameter: Queue Bandwidth Priority

Path: Configuration Manager > Protocols > DLSw > Prot Prioritization (Outbound) >

Peer Queue Entries > Queues > Add

Default: 10

Range: 0 to 100

Function: Specifies a bandwidth percentage that you allocate to a protocol priority queue

for a configured DLSw peer

Instructions: The bandwidth for queue number zero must be greater than 0. You can assign

any percentage between 0 and 99 to subsequent queues, as long as the combined

bandwidth for all queues totals 100 percent.

On low speeds running NetBIOS, you should allocate 20% of the total

bandwidth due to end station timing.

MIB Object ID: N/A

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 213