Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 161)

DLSw Service Parameters

304233-A Rev. 00

A-21

Parameter: Initial Pacing Window

Path:

Configuration Manager > Protocols > DLSw > Advanced > Global

Default: 5

Range: 5 to 100

Function: Specifies the initial number of received data frames that the local DLSw router

permits during an established connection with another DLSw router running

RFC 1795 or DLSw Version 2 or RFC 2166. The two DLSw routers advertise

their initial pacing value to each other over capabilities exchange messages.

Instructions: Enter a value in the range 5 to 100. Depending on the amount of network traffic

during the session, the router may increase or decrease the pacing window size.

An increase in the window size means that the router is granting permission to

receive more data frames from the sending DLSw router. A decrease in the

window size means that the router is reducing the number of data frames that it

will accept from the sending DLSw router.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.27

Parameter: NetBIOS Session Alive Filter

Path:

Configuration Manager > Protocols > DLSw > Advanced > Global

Default: Enable

Options: Enable

Disable

Function: Enables or disables the NetBIOS session alive frame transmissions.

Continuously sending session alive frames can cause lines to remain active

unnecessarily, possibly increasing the usage cost of the line.

Instructions: Click on Values and select Enable or Disable. Select Enable to start the

NetBIOS session alive filter, stopping session alive frame transmissions. Select

Disable to cancel the filter and continue session alive frame transmissions every

30 seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.29

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 271 272

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 161