Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 94)

Configuring PPP Services

3-40

308639-14.00 Rev 00

Using Site Manager

To disable loopback checking for this line, do the tasks in the following table.

Setting the Maximum Receive Unit (MRU)

The Maximum Receive Unit (MRU) Size parameter specifies the maximum

receive unit size, in bytes, for the line. The default MRU size for leased lines is

1590 bytes. The default MRU size for dial lines is 1500 bytes.

For leased lines, the router negotiates the MRU size automatically, so you do not

have to configure a value manually. However, to ensure that the router can

negotiate the MRU size successfully, you must disable the RFC1661 Compliance

parameter. This parameter is enabled by default to ensure the correct MRU size for

dial lines.

If you change the size of the MRU and the RFC 1661 COmpliance parameter is

enables, Site Manager and the BCC will automatically increase the size of the

MTU.

For instructions on disabling RFC 1661 compliance, see “Disabling RFC 1661

Compliance.”

Using the BCC

The MRU size and RFC 1661 compliance are included in the

dial

object for PPP

dial interfaces. For instructions on setting the

mru

parameter and

mru-compliance

parameter, see Configuring Dial Services.

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Choose

Lines

. The Lines window opens.

4. Set

Magic Num Disable

(See page A-27.)

5. If you have no other PPP line parameters

to configure, click on

. Otherwise,

continue with the Lines configuration.

The Interfaces window opens.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 151 152

Comentários a estes Manuais

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 94

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring PPP Services