Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 62)

Configuring PPP Services

3-8

308639-14.00 Rev 00

To enable or disable bridging on this interface, do the tasks in the following table.

Enabling VINES Support on This Interface

If you enabled VINES support when you first configured PPP on this interface,

this parameter defaults to Enable; otherwise, the default is Disable. To stop

VINES traffic from being routed over this interface, set this parameter to Disable.

This parameter enables or disables the network control protocol for VINES. It

does not enable or disable VINES routing services for the interface. However,

disabling the network control protocol for VINES stops VINES traffic from being

routed over this interface.

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Set

Bridge Enable

. (See page A-6.)

4. Enable or disable the encapsulation mode

for the type of traffic bridged on this

interface.

•Set

Bridge Ethernet

(See page A-10.)

•Set

Bridge FDDI

. (See page A-11.)

•Set

Bridge Token Ring

. (See page A-11.)

5. If you have no other Interface parameters

to configure, click on

. Otherwise,

continue with the Interface configuration.

The Configuration Manager window

appears.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 151 152

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 62