Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 76)

Configuring PPP Services

3-22

308639-14.00 Rev 00

Using Site Manager

To set the maximum number of unacknowledged configure-request packets

allowed on this interface, do the tasks in the following table.

Specifying the Maximum Number of Terminate-Request Packets

PPP uses the Maximum Terminate-Requests parameter to specify the maximum

number of unacknowledged terminate-request packets that the router transmits

before assuming that the peer router on the other end of the link is unable to

respond. The valid acknowledgment is a terminate-ACK packet. The default value

is 2 packets.

Using the BCC

Navigate to the line prompt for the interface and enter

max-terminate-requests

seconds

For example, the following command sets the maximum number of

unacknowledged terminate-request packets allowed to 5 on interface 3/1.

line/3/1# max-terminate-requests 5

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Choose

Lines

. The Lines window opens.

4. Set

Max Configure-Requests

(See page A-16.)

5. If you have no other PPP line parameters

to configure, click on

. Otherwise,

continue with the Lines configuration.

The Interfaces window opens.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 151 152

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 76