Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 60)

Configuring PPP Services

3-6

308639-14.00 Rev 00

Configuring AppleTalk

To enable AppleTalk on the interface, use Site Manager to configure an AppleTalk

node number and the AppleTalk routing update protocol for the remote peer to

use.

Defining a Remote AppleTalk Node Number for a Remote Peer

If you want to specify an AppleTalk node number that the peer router should use,

enter it here. There is no default value; you can enter any valid AppleTalk node

number. This interface includes this AppleTalk node number in its network

control protocol negotiations.

Defining the AppleTalk Routing Protocol

You can specify the AppleTalk routing update protocol for the peer router to use.

Since the only option for the AppleTalk Routing Protocol is the Routing Table

Management Protocol (RTMP), you can simply accept the default value. This

interface specifies AppleTalk RTMP as the routing update protocol in NCP

negotiations.

To specify an AppleTalk Node Number and the AppleTalk Routing Protocol, do

the tasks in the following table.

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Set the

Remote AppleTalk Node

(See page A-9.)

4. Set the

AppleTalk Routing Protocol

(See page A-10.)

5. If you have no other Interface parameters

to configure, click on

. Otherwise,

continue with the Interface configuration.

The Configuration Manager window

appears.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 151 152

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 60