Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 73)

Customizing PPP

308639-14.00 Rev 00

3-19

Using Site Manager

To set the restart timer on this interface, do the tasks in the following table.

Specifying the Interval Between Echo-Request Packets

The value of the Seconds between Xmit of Echo-Request parameter specifies the

number of seconds that the router waits between the transmission of echo-request

packets. A value of 0 (the default) means that this parameter is turned off.

Using the BCC

Navigate to the line prompt for the circuit and enter

echo-requests

seconds

For example, the following command sets the echo-request interval to 5 seconds

on circuit 3/1.

line/3/1# echo-requests 5

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Choose

Lines

. The Lines window opens.

4. Set

Restart Timer in Seconds

(See page A-15.)

5. If you have no other PPP line parameters

to configure, click on

. Otherwise,

continue with the Lines configuration.

The Interfaces window opens.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 151 152

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 73