Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 77)

Customizing PPP

308639-14.00 Rev 00

3-23

Using Site Manager

To set the maximum number of unacknowledged terminate-request packets

allowed on this interface, do the tasks in the following table.

Specifying the Maximum Configuration Failure Count

The Max Configuration Failure Count parameter specifies the maximum number

of configure-NAK packets that the router sends before sending a configure-reject

packet for those options that it does not agree with. The default value is 10

packets.

Using the BCC

Navigate to the line prompt for the interface and enter

max-configure-fails

seconds

For example, the following command sets the maximum number of

configure-NAK packets allowed to 5 on interface 3/1.

line/3/1# max-configure-fails 5

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Choose

Lines

. The Lines window opens.

4. Set

Max Terminate-Requests

(See page A-16.)

5. If you have no other PPP line parameters

to configure, click on

. Otherwise,

continue with the Lines configuration.

The Interfaces window opens.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 151 152

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 77