Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 74)

Configuring PPP Services

3-20

308639-14.00 Rev 00

Using Site Manager

To set the interval between transmissions of echo-request packets on this interface,

do the tasks in the following table.

Specifying the Acceptable Level of Echo-Reply Packet Loss

The Echo-Reply Acceptable Loss parameter specifies the maximum number of

unacknowledged echo-request packets that the router will transmit before

declaring the point-to-point link down. The default value is 3 packets.

Using the BCC

Navigate to the line prompt for the circuit and enter

echo-replies-lost

seconds

For example, the following command sets the number of acceptable packets lost to

5 seconds on circuit 3/1.

line/3/1# echo-replies-lost 5

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Choose

Lines

. The Lines window opens.

4. Set

Seconds between Xmit of

Echo-Request

. (See page A-15.)

5. If you have no other PPP line parameters

to configure, click on

. Otherwise,

continue with the Lines configuration.

The Interfaces window opens.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 151 152

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 74