Avaya Configuring Dial Services Manual do Utilizador descarregar pdf (Página 439)

100

101

Configuration Examples

117353-B Rev. 00

B-17

Configuring Dial Backup Using the BCC

The following section explains how to configure dial backup with PPP on the

primary line using the BCC (see Figure B-3

). You would follow similar steps to

configure Bay Networks Standard on the primary line.

Follow the series of commands in the order they are presented; the numbered steps

provide explanation of each series of commands. Each time you enter a command

and enter a carriage return, are entering a new context with a unique prompt. In

configuration mode, you can use the question mark (

) and

help tree

commands

at any prompt to discover and navigate the configuration hierarchy.

Configuration of Router 1

To create the dial backup configuration in Figure B-3

on page B-12, configure

Router 1 as follows:

Enter configuration mode:

bcc>config

Configure a leased, synchronous interface with PPP on serial interface

slot 1, connector 1:

box# serial 1/1

serial/1/1# ppp

ppp/1/1# ip 129.122.3.1/255.255.255.0

ip/192.122.3.1/255.255.255.0# cwc

Create a dial object for serial interface slot 5, connector 1. PPP is the

default protocol. Add this line to a backup pool.

box# serial 5/1

serial/5/1# dial

dial/serial/5/1# cwc

Create a backup pool with pool ID 22 then create a backup line on the

serial interface you just created in step 2. Add this line to the backup

pool.

box# backup-pool 22

backup-pool/22# backup-line serial/5/1

1 2 ... 434 435 436 437 438 439 440 441 442 443 444 ... 481 482

Comentários a estes Manuais

Sem comentários

Avaya Configuring Dial Services Manual do Utilizador Página 439

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring Dial Services