Avaya Configuring Dial Services Manual do Utilizador descarregar pdf (Página 207)

100

101

Customizing Line Pools

117353-B Rev. 00

9-35

Modifying the BRI and PRI Modes of Operation

You cannot modify the BRI or PRI port application mode (Site Manager) or the

BRI mode (BCC). You must specify the mode of operation when you initially

configure an ISDN interface. To change the mode, you must delete the interface

and recreate it with a different mode.

To delete these interfaces, see “Deleting BRI and PRI from the Router

” on

page 9-56

To set the mode again, see “Creating Line Pools with ISDN Lines” on page 2-8

(Site Manager) or “Creating Dial Backup Service for ISDN Interfaces” on

page 3-11 (BCC).

Configuring Selective PRI Service

For most networks, you have configured all of the available B channels for PRI

service. (See Chapter 2, “Starting Dial Services Using Site Manager” or

Chapter 3, “Starting Dial Backup Using the BCC”). If you have purchased

selective PRI service, you can modify the number of individual B channels for the

interface.

Using the BCC

If you purchased selective PRI service from your ISDN provider, you can select

individual timeslots. Select only the timeslots that the service provider assigns to

you. For example, if your provider assigns you timeslots 1 through 10, select slots

1 through 10 in the Timeslots window.

To select individual timeslots, navigate to the pri prompt and enter:

channels

channel numbers

then enter:

dial

For example:

pri/2/1# channels {1 2 3 4}

pri/2/1# dial

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 481 482

Comentários a estes Manuais

Sem comentários

Avaya Configuring Dial Services Manual do Utilizador Página 207

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring Dial Services