Avaya Troubleshooting Routers Guia de Resolução de Problemas descarregar pdf (Página 213)

Using the Technician Interface to Configure and Run Packet Capture

B-25

<value>

• 1 if you want Packet Capture to copy a packet if it matches either Filter 1 or

Filter 2.

• 2 if you want Packet Capture to copy a packet only if it matches both Filter 1

and Filter 2.

Conﬁguration Examples

This section shows examples of packet capture conﬁgurations. The circuit is on a

CSMA/CD interface. The line number is 102101.

Example 1

This example sets the following conﬁguration:

• 1024 bytes of memory reserved for Packet Capture

• 64 bytes of each packet to be saved

• Incoming and outgoing packets to be saved

• No ﬁlters and No triggers

The instructions are as follows:

1. Reserve 1024 bytes of memory:

set wfPktCaptureEntry.8.102101 1

represents the wfPktCaptureBufSize attribute.

2. Save 64 bytes of each packet:

set wfPktCaptureEntry.9.102101 2

represents the wfPktCapturePktSize attribute.

3. Save incoming and outgoing packets:

set wfPktcaptureEntry.10.102101 3;commit

represents the wfPktCaptureDirection attribute.

Note: Packet Capture uses this parameter only if you conﬁgure both capture

ﬁlters associated with a single direction.

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 253 254

Sem comentários

Avaya Troubleshooting Routers Guia de Resolução de Problemas Página 213