Avaya BCM 4.0 Networking Guia de Configuração descarregar pdf (Página 586)

100

101

586 Chapter 64 Configuring IP Routing

N0060606N0060606

OSPF NBMA Neighbors

Frame Relay on BCM is a Non Broadcast Multiple Access (NBMA) network. NBMA is a network

that can connect two or more routers, but has no hardware broadcast capability. For OSPF to

function properly on an NBMA network, you must configure the router running OSPF to send

unicast control packets to the OSPF neighbor routers. The OSPF NBMA Neighbors panel allows

you to enter IP addresses of the NBMA Neighbors.

1 Click Configuration > Data Services > Router.

2 Click the WA N interface you want configure.

The OSPF NBMA Neighbors field appears under the OSPF parameters tab.

Figure 186 Add OSPF NBMA Neighbors

To add OSPF NBMA Neighbors

1 Click Add.

The Add OSPF NBMA Neighbor dialog box appears. See Figure 186.

2 Enter the Neighbor address.

3 Click OK.

To delete OSPF NBMA Neighbors

1 Click the OSPF NBMA Neighbor you want to delete.

2 On the Configuration menu, click Delete OSPF Neighbor.

A confirmation dialog box appears.

3 Click Yes .

Note: The OSPF NBMA Neighbors is available only for WAN interfaces.

Table 140 IP OSPF NBMA Neighbor parameters

Attribute Attribute Description

Neighbor Address <IP address> Specify the IP address of the neighboring router.

Note: This address must be on the same subnet.

1 2 ... 581 582 583 584 585 586 587 588 589 590 591 ... 757 758

Comentários a estes Manuais

Sem comentários

Avaya BCM 4.0 Networking Guia de Configuração Página 586

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya BCM 4.0 Networking