Avaya BCM 4.0 Networking Guia de Configuração descarregar pdf (Página 528)

100

101

528 Chapter 61 Data modules

N0060606N0060606

Configuring DDI Mux connections

After you install the DDI Mux, configure the module settings in the Element Manager.

To configure the DDI Mux

• assign the DDI Mux modules under Configuration > Resources > Telephony Resources

• assign the lines for voice traffic under Configuration > Resources > Telephony Resources

• assign lines to the Data Module portion of the module

• configure the DDI Mux to work with the DTE

Before you start, record the settings for the DDI Mux in the form provided in the Programming

Records. At the very least, you need the following configuration information:

Assigning the DDI Mux modules

1 Click Configuration > Resources > Telephony Resources.

2 Click the DS30 Bus heading that was assigned to the DDI Mux.

This Bus is the same as the DS30 bus you assigned to the DDI Mux using the DIP switches on

the module.

3 Make sure the option in the Prog Type drop list is Trunk module.

4 Click the heading of the next DS30 Bus.

This Bus is the DS30 bus automatically assigned to the Data Module portion of the DDI Mux.

5 Double-click the Prog Type field to activate the drop list, then click Data module.

Table 119 Configuring DDI Mux connections

Protocol V.35 ❑ Loopback state: Off ❑ Manual DTE ❑

Manual DS30 ❑ Automatic DTE ❑

Fixed Access

Line ____ Channel ____ Line ____ Channel ____

1 2 ... 523 524 525 526 527 528 529 530 531 532 533 ... 757 758

Comentários a estes Manuais

Sem comentários

Avaya BCM 4.0 Networking Guia de Configuração Página 528

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya BCM 4.0 Networking