Avaya BCM 4.0 Networking Guia de Configuração descarregar pdf (Página 391)

100

101

391

BCM 4.0 Networking Configuration Guide

Chapter 42

Configuring centralized voice mail

The BCM supports voice mail configuration either from the local source or by accessing a remote

voice mail system located on another BCM, located on a Business Communications Manager 4.0,

or attached to a Meridian 1 system. The system can be configured to more than one voice mail

system. However, each telephone can only be configured to one system.

Refer to the following information:

• “Local system as host” on page 391

• “Meridian system as host” on page 392

• “System set up for host system” on page 392

• “System set up for satellite systems” on page 393

• “Configuring the system for centralized voice mail” on page 395

DMS100/SL100 centralized voice mail: The BCM can also support centralized voice mail on a

DMS100/SL100 switch through a PRI-DMS100 connection. The system also supports centralized

voice mail on the switch through an indirect connection through an M1, where the DMS100/

SL100 is connected by PRI-DMS100 to the M1 and the M1 is connected to a BCM through a

PRI-MCDN connection. The DMS100/SL100 can use either the Public number or Private number

of a BCM telephone to designate the mailbox number on the voice mail system.

To configure centralized voice mail, the system must be using a CDP dialing plan and be running

on a private network created using either DPNSS (UK profile), PRI SL-1 or VoIP trunking set up

with MCDN. Private network configuration and features are discussed in “Private networking:

MCDN over PRI and VoIP” on page 335.

Local system as host

A local system that acts as a central voice mail location must be able to support MCDN. You can

add up to 1000 mailboxes on BCM voice mail, providing you have entered adequate keycodes.

CallPilot constraints:

• To allow use of the auto attendant feature, you must ensure that the Allow Network Transfers

check box is selected in the CallPilot Manager.

• To allow use of voice mail, you must ensure that the Enabled Redirected DN check box is

selected in the CallPilot Manager.

• A target line must be set up to be answered by the auto attendant. The target line received

digits should match the voice mail DN.

Note: For centralized voice mail from a DMS100/SL100 system,

configure the BCM dialing plan as either CDP or UDP.

1 2 ... 386 387 388 389 390 391 392 393 394 395 396 ... 757 758

Comentários a estes Manuais

Sem comentários

Avaya BCM 4.0 Networking Guia de Configuração Página 391

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya BCM 4.0 Networking