Avaya BCM 4.0 Networking Guia de Configuração descarregar pdf (Página 238)

100

101

238 Chapter 21 BRI ISDN: BRI loop properties

N0060606N0060606

Figure 79 D-Packet Service (T-loops) tab

Table 49 describes each section on the D-Packet Service panel.

S-loops assigned DNs

The Details for Loop panel for S-loops allows you to view which device records are assigned to a

loop, and to add or delete a record from the loop.

Table 49 D-packet settings

Attribute Value Description

Associated loop X01-X04 S-loop: This is the loop on the BRI module where the device is connected.

Enabled D-packet

Service

<check box> Enable this service, only if you are installing devices that require this type

of service.

TEI <digits> These entries identify up to eight terminal identifiers for the devices

assigned to the S-loops. Your BRI service provider supplies these

numbers, if they are required.

Actions

Add 1. In the top frame, click the loop where you want to define D-Packet Service.

2. In the bottom frame, Ensure Enable D-packet service check box is selected.

3. In the Associated loop field, enter a defined S-loop.

4. Under the TEIs table, click Add.

5. Enter a TEI.

6. Click OK.

7. Repeat for all the TEIs you want to assign.

Delete 1. In the top frame, click the loop where you want to delete TEI assignments.

2. In the bottom frame, click the TEI you want to delete.

3. Click Delete.

4. Click OK.

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 757 758

Comentários a estes Manuais

Sem comentários

Avaya BCM 4.0 Networking Guia de Configuração Página 238

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya BCM 4.0 Networking