Avaya BCM 4.0 Networking Guia de Configuração descarregar pdf (Página 533)

100

101

Chapter 61 Data modules 533

BCM 4.0 Networking Configuration Guide

To assign one or more Fixed lines to the data module

1 Click Configuration > Resources > Telephony Resources.

2 Click the Bus number 8.

The details panel appears.

3 In the details panel, click the Data Module Fixed Line Assignment tab.

The Assigned Lines table appears.

4 Click Add.

The Add Lines Assignment dialog appears.

5 In the Add Lines Assignment dialog box, enter the line number of one of the fixed line

assigned to the interface.

6 Click OK.

7 Click Save.

8 If you are adding all of the lines to a single Interface, repeat steps 4 to 7 for each line you want

to assign to the Data Module.

If you are adding the lines to multiple Interfaces, repeat steps 4 to 7 for each line you want to

assign to the Data Module.

9 Select Unassigned or Assigned.

10 Record each channel and line combination. Each channel used by the BayStack data module

maps to a line.

To delete a line assignment

1 Click Configuration > Resources > Telephony Resources.

2 Click the Bus number assigned to the Data Module.

The details panel appears.

3 In the details panel, click the Data module Line Assignment tab.

The Assigned Lines table appears.

4 Click on the line number you want to remove.

5 Click Delete.

6 Click Yes .

Switched access (PRI & BRI)

You can assign ISDN lines to the BayStack data module to provide:

• normal data network access for the data module

• dial-up backup and overflow bandwidth (additional channels or trunks) as needed

1 2 ... 528 529 530 531 532 533 534 535 536 537 538 ... 757 758

Comentários a estes Manuais

Sem comentários

Avaya BCM 4.0 Networking Guia de Configuração Página 533

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya BCM 4.0 Networking