
134 Chapter 8 Configuring telephony resources
N0060606N0060606
Figure 36 IP Terminal Global Settings subpanel
Table 30 defines the fields on this panel and indicates the lines.
Table 30 IP terminal Global panel fields (Sheet 1 of 2)
Field Value Description
Enable registration <check box> Select this checkbox to allow new IP clients to register with the
system.
Warning: Remember clear this check box when you have finished
registering the new telephones.
Enable global
registration password
<check box> If you want to require the installer to enter a password when IP
telephones are configured and registered to the system, select this
check box.
Global password <10 alphanumeric>
Default: bcmi (2264)
If the Enable global registration password check box is selected,
enter the password the installer will enter on the IP telephone to
connect to the system.
If this field is left blank, no password prompt occurs during
registration.
Auto-assign DNs <check box> If selected, the system assigns an available DN as an IP terminal
requests registration. It does not prompt the installer to enter a set
DN. Note: For this feature to work, Registration must be selected
and Password must be blank.
If not selected, the installer receives a prompt to enter the assigned
DN during the programming session.
Note: Refer to the Caution notice at the top of this section.
Advertisement/Logo <alphanumeric
string>
Any information in this field appears on the display of all IP
telephones. For example, your company name or slogan.
Default codec Auto
G.711-aLaw
G.711-uLaw
G.723
G.729
G.729 + VAD
G.723 + VAD
If the IP telephone has not been configured with a preferred codec,
choose a specific codec that the IP telephone will use when it
connects to the system.
If you choose Auto, the IP telephone selects the codec.
If you are unsure about applying a specific codec, ask your network
administrator for guidance.
Comentários a estes Manuais