Avaya BCM 4.0 Networking Guia de Configuração Página 497

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 758
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 496
Chapter 59 Configuring the LAN resources 497
BCM 4.0 Networking Configuration Guide
IP Settings
Figure 151 LAN IP Settings
Table 8 IP Settings
Attribute Value Description
IP Address Specification
Obtain IP address
dynamically
<check box> If selected, enables DHCP.
Default: Disabled
IP address <IP address> Enter the IP address of the LAN interface in the following format:
255.255.255.255.
If you do not know your LAN interface IP address, contact your network
administrator or your Internet service provider.
Web Cache: If you have enabled Web Cache, you must update the
Web Cache page when you change the IP address of the interface.
Refer to “Web Cache page update required” on page 694.
IP Phones (Phase 2): If you change the IP address of the BCM, any
Phase 2 IP Phones using DHCP will lose their connection to the BCM.
You must reboot the Phase 2 IP Phones to reconnect to the BCM.
IP subnet mask <IP address> Enter the subnet mask of the LAN interface in the following format:
255.255.255.255.
If you do not know your subnet mask address, contact your network
administrator or your Internet service provider.
Actions
Modify <button> Click to modify the IP settings.
Note: Consult your network administrator for the appropriate configuration information
before changing the settings.
Note: When you change these parameters, you must reboot the BCM system.
Vista de página 496
1 2 ... 492 493 494 495 496 497 498 499 500 501 502 ... 757 758

Comentários a estes Manuais

Sem comentários