Avaya IP500 V2 Instruções de Operação descarregar pdf (Página 110)

Installing IP500/IP500 V2 Page 110

15-601042 Issue 28g (11 October 2013)IP Office 9.0

5.6 Disable Unused Trunks

Each IP Office trunk card provides a fixed number of trunk ports with digital trunk ports supporting a fixed number of

digital channels. By default the IP Office configuration will have settings for all the possible trunks and channels.

In cases where the number of trunks or trunk channels in use or licensed is lower than the number supported by the

trunk card, the unused trunks and channels must be disabled.

· Failure to do this will cause problems with outgoing calls. For example, on a system with an ATM4 trunk card

fitted but only two analog trunks actually connected, failure to disable the other two trunks within the IP Office

configuration will cause 50% of outgoing call attempts to fail. This is because the system cannot automatically

detect the service status of individual analog trunks.

· For IP Office Release 8.1 Feature Pack 1 and higher with IP500 Analog Trunk 4 V2 cards and ATM4

Combination V2 cards, the system can detect with analog trunks are connected and so can automatically treat

unconnected trunk ports as out of service.

· ! WARNING

This process requires the IP Office system to reboot in order to complete the changes. The reboot ends any

current calls and services.

To disable unused trunks:

1.Start IP Office Manager and receive the configuration from the IP Office system.

2.Within the IP Office configuration, select Line.

3.For each line, set those lines or channels that are not connected or being used as out of service. The location of

the relevant setting varies for each trunk type.

· Analog Trunks

To disable the whole trunk, on the main form set the Admin option to Out of Service.

· BRI, E1 PRI, S0 and QSIG Trunks

To disable the whole trunk, on the main form set the Admin option to Out of Service. Otherwise set the

number of channels to match the actual subscribed channels.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 441 442

Sem comentários

Avaya IP500 V2 Instruções de Operação Página 110