Avaya Configuring IP Services Manual do Utilizador descarregar pdf (Página 63)

100

101

Configuring IP Routers and Interfaces

2-35

Parameter: UnNumbered Assoc Address

Default: None

Options: Any valid IP address

Function: Speciﬁes an address that IP uses when sourcing a packet.

RIP uses this address to make decisions about advertising subnets over

the unnumbered interface. RIP advertises subnets over the unnumbered

interface if the subnets have the same mask as the associated address.

Instructions: Specify the address of any numbered interface on the router.

If you are running RIP over the unnumbered interface and if you are using

a subnet address as the associated address, the local and remote associated

address should have the same network number. If you conﬁgure a local

and remote associated address using different network numbers, you must

use RIP2 mode.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.110

Editing IP Interface Parameters

To edit an IP interface, begin at the Conﬁguration Manager window shown in

Figure 2-9 and proceed as follows:

1. Select Protocols➔IP➔Interfaces.

The IP Interfaces window opens (Figure 2-11). It lists all IP interfaces

conﬁgured on the router.

2. Click on the interface you want to edit.

3. Edit those parameters you want to change.

All IP interface parameters are described in the following section.

4. Click on Apply to implement your changes.

5. Click on Done to exit the window.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 465 466

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Services Manual do Utilizador Página 63

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP Services