Avaya Configuring IP Services Manual do Utilizador Página 37

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 466
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 36
Configuring IP Routers and Interfaces
2-9
For example, in Figure 2-3, the router and Host C are on the same physical
network. Both devices have an assigned IP address (the router’s is 140.250.200.1
and Host C’s is 140.250.200.4) and both devices have an assigned physical
address (the router’s is 00 00 A2 00 00 01 and Host C’s is 00 00 A2 00 10 40).
In Figure 2-3, the router wants to send a packet to Host C but knows only Host C’s
IP address. The router uses ARP to determine Host C’s physical address, as
follows:
1. The router broadcasts a special packet, called an ARP request, that asks IP
address 140.250.200.4 to respond with its physical address.
2. All network hosts receive the broadcast request.
3. Only Host C responds with its hardware address.
The router maps Host C’s IP address (140.250.200.4) to its physical address
(00 00 A2 00 10 40) and saves the results in an address-resolution cache for future
use.
Note: It is possible for the router to send out ARP requests even if ARP, which
is a dynamically loaded module, is not currently loaded on the router. It is the
responsibility of the network administrator to ensure that ARP is loaded
correctly on a slot. To do this through Site Manager, select Events
Manager
Options
Filters; then select LOADER and Debug, and do a
File
Get Current Log File. Verify that ARP is loaded on a slot by locating the
following message in the log:
#xx:01/01/95 10:10:55.00 DEBUG SLOT x LOADER CODE:33
Loader service completed for ARP.EXE 0xxxxxxxxx
Site Manager allows you to select an address-resolution protocol for an IP interface. For
instructions, see the Address Resolution parameter on page 2-40. Site Manager also
allows you to select an ARP type for an interface configured for a Token Ring network. For
instructions, see the TR Endstation ARP Type parameter on page 2-51.
Vista de página 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 465 466

Comentários a estes Manuais

Sem comentários