
Configuring IP Services
4-32
Parameter: Dead Interval
Default: 40 seconds
Range: 1 to 2147483647 seconds
Function: Indicates the number of seconds that a router’s Hello packets have not
been seen before its neighbors declare the router down. The Dead Interval
value should be some multiple of the Hello interval value. We suggest the
following values for this parameter:
Instructions: Either accept the default value of 40 seconds or set the Dead Interval to
some higher number for slower-speed serial lines.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.12
Parameter: Poll Interval
Default: 120 seconds
Range: 1 to 2147483647 seconds
Function: Indicates the largest number of seconds allowed between Hello packets
sent to an inactive nonbroadcast multiaccess neighbor.
Instructions: Either accept the default value of 120 seconds or set this parameter to
some slightly higher number for slower-speed serial lines.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.13
Network Type Suggested Dead Interval
Broadcast 40 seconds
Point-to-point 60 seconds
NBMA 80 seconds
Point-to-
multipoint
60 seconds
Note: This value must be the same for all routers attached to the same
network.
Comentários a estes Manuais