Avaya Configuring IP Services Manual do Utilizador descarregar pdf (Página 60)

100

101

Configuring IP Services

2-32

Conﬁguring a Circuit and Adding an IP Interface

Before you can add an IP interface to a circuit, you must perform the following

operations to ensure that the slot is properly set up for IP:

1. Open a conﬁguration ﬁle.

2. Specify a slot and conﬁgure a link module on the slot (if the conﬁguration ﬁle

is a local mode ﬁle).

3. Select a link or net module connector and conﬁgure a circuit on the connector,

or conﬁgure a WAN circuit if this connector requires one.

For instructions on performing these operations, see Conﬁguring Routers.

Once you have conﬁgured a circuit, you are ﬁnished with the Add Circuit window.

1. Click on OK on the Add Circuit Window.

The Select Protocols window opens.

2. Select IP from the Select Protocols window and click on OK.

Site Manager displays the IP Conﬁguration window (see Figure 2-10).

3. Edit the parameters on the screen.

4. Click on OK if you want to accept the default values for the remaining IP

interface parameters.

Site Manager displays the Conﬁguration Manager window.

5. Click on Details if you want to edit all IP interface parameters.

Site Manager displays the IP Interfaces window (see Figure 2-11).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 465 466

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Services Manual do Utilizador Página 60

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP Services