Avaya Using Technician Interface Software Manual do Utilizador descarregar pdf (Página 53)

Configuring the Console Port

308657-14.00 Rev 00

2-13

Parameter: Password Timeout

Attribute Name: wfSerialPortPasswordTimeOut

Attribute Number: 17

Default: 1 min

Options: 1 to 99 min (99 indicates infinity)

Function: Specifies the number of minutes the Technician Interface waits to time out

when no one has pressed the enter key after the Password prompt. This

parameter is valid only when Modem Enable is set to 1 (Enable). The

Technician Interface returns to the Login prompt when the timeout value

is exceeded.

Instructions: Accept the default value (1 minute) or specify a different timeout value.

Command:

set wfSerialPortEntry.17.

<port_no.> <option>

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.17

Parameter: Command Timeout

Attribute Name: wfSerialPortCommandTimeOut

Attribute Number: 18

Default: 15 min

Options: 1 to 99 min (99 indicates infinity)

Function: Specifies the number of minutes that can elapse before the Technician

Interface disconnects the Telnet session, if you do not enter a command at

the command prompt. This parameter is valid only when Modem Enable

is set to 1 (Enable).

Instructions: Accept the default value (15 minutes) or specify a different timeout value.

Command:

set wfSerialPortEntry.18.

<port_no.> <option>

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.18

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 343 344

Sem comentários

Avaya Using Technician Interface Software Manual do Utilizador Página 53